Babban bututun gilashin CO2 mai ƙarfi na'urar sassaka mai sauri Featured Image

Injin sassaka mai sauri na babban bututun gilashin CO2 Laser

Girman aiki: 0-400*400mm
(Zaɓin mayar da hankali mai ƙarfi na iya nuna matsakaicin 1200*1200mm)

Na'urar auna sino-galvo 2808 galvanometer
Teburin aiki na zuma
S&A CW-5200 babu ruwan sanyi
Nasarar tallafin software na EZCAD ta gaske 7/8/10
Shahararren alama - bututun laser na Beijing RECI W4 (100W-130W)Co2
Samar da wutar lantarki ta Taiwan Meanwell

Cikakken Bayani game da Samfurin

Gabatarwar bidiyo

Injin alamar laser na CO2 yana amfani da iskar gas ta CO2 don cike bututun fitarwa a matsayin hanyar samar da laser. Idan aka yi amfani da babban ƙarfin lantarki a kan lantarki, ana samar da fitar haske a cikin bututun fitarwa, wanda ke sa ƙwayoyin iskar su fitar da hasken laser. Sannan ana canza hanyar gani ta hasken laser ta hanyar galvanometer mai sarrafa kwamfuta don cimma alamar atomatik.

An tsara wannan injin ne ga abokan ciniki waɗanda ke son yin alama ga manyan samfuran da ba na ƙarfe ba kamar itace, acrylic, takarda, fata, jeans... yana da karko kuma abin dogaro, kuma yana da ikon aiki na tsawon awanni 24. Ya dace da ci gaba da samar da adadi mai yawa, nau'ikan iri da kuma yanayin injina mai inganci.

Fa'idodi

Babban iko da inganci: Wannan na'urar laser mai sauri tana da babban ƙarfi da kuma ingantaccen juyi na lantarki, kuma a halin yanzu laser ne mai mafi girman ƙarfi. Ana sarrafa ƙarfinsa ta hanyar software kuma ana iya daidaita shi akai-akai don biyan buƙatun sarrafawa daban-daban.

Hasken Laser: Ta amfani da hasken laser mai girman 10.6um, ta hanyar faɗaɗa hasken da kuma mayar da hankali, kuma a ƙarshe ta hanyar sarrafa karkacewar galvanometer, yana aiki a saman kayan aikin bisa ga hanyar da aka ƙayyade, don haka saman aikin ya yi tururi don cimma tasirin alama. Yanayin hasken yana da kyau kuma aikin tsarin yana da karko, wanda ya dace da wuraren sarrafa masana'antu tare da manyan girma, iri-iri, babban gudu, da kuma ci gaba da samarwa mai inganci.

Faɗin aikace-aikace: Ana amfani da kayan aikin alamar laser na co2 sosai wajen yin alama da yanke kayan da ba na ƙarfe ba, kamar sassaka takalma, maɓallai, fata, itace, robobi, kayan lantarki, plexiglass, da sauransu. A lokaci guda, ya dace da sassaka laser, yanke laser, alamar laser da sauran hanyoyin da ke kan takarda, PVC, roba, itace, filastik, da sauransu.

Fa'idodin sarrafawa: Tsarin alamar laser yana da girma, alamar a bayyane take, ba ta da sauƙin sawa, kuma ingancin yankewa yana da yawa. Ana iya sarrafa zurfin sassaka yadda aka ga dama, farashin sarrafawa yana da ƙasa, ba a buƙatar kayan amfani, kuma kwamfuta ce ke sarrafa shi.

Siffofin yau da kullun

Teburin yankewa sama-ƙasa, mai sauƙin nemo madaidaicin nisan mayar da hankali don abubuwa daban-daban masu kauri

Sigogi na fasaha

Samfuri	DW-100CO2
Tsarin alama	0-400400mm(zai iya haɓakawa 600600mm/800800mm/12001200mm)
Ƙarfi	100W-130W
Tushen Laser	Bututun CO2 na RECl
Shugaban Laser	Kan sikandare
Tsawon igiyar laser	10.6um
Tsarin tallafi	PLT, BMP, DXF, JPG, TIF, AI da sauransu
Maimaita daidaito	<0.01mm
Software	Asalin software na EzCad
Tushen wutan lantarki	110V/220V/ 50~60Hz
Hanyoyi masu sanyaya	Sanyaya ruwa
Nauyin Kunshin	220KG
Girman marufi	23005501500mm

※Menene bambanci tsakanin injin sassaka bututun laser na gilashin Co2 da injin alamar bututun CO2?

Dukansu suna amfani da bututun laser na gilashi iri ɗaya, tsawon fitar da iskar gas na laser 10.64um, injin sassaka laser na Co2 yana amfani da axis na injina na XY da kan laser, nisan mayar da hankali gajere ne, don haka ana iya amfani da shi don sassaka zurfi da yankewa, amma saurin yana raguwa. Ana ƙara ƙarfin injin alamar laser na CO2 ta hanyar na'urar duba galvanometer da madubin F-Theta, katin sarrafawa na yau da kullun a kwamfuta da laser, hoto, rubutu, adadi da layuka akan aikin bisa ga buƙatun mai amfani don yin alama, saurin yana da sauri sosai, da fatan za a duba bidiyo akan gidan yanar gizon mu don ganin bambancin saurin.

※Menene bambanci tsakanin na'urar alama ta laser gilashi ta Co2 da na'urar alama ta laser bututun ƙarfe ta CO2 RF?

Injin alamar laser na CO2, wato injin alamar laser na carbon dioxide, an raba shi zuwa bututun RF injin alamar laser na CO2 da bututun gilashi injin alamar laser na CO2. Injin alamar laser na CO2 injin alamar galvanometer ne na laser wanda ke amfani da iskar CO2 a matsayin matsakaiciyar aiki.
Bututun ƙarfe na RF yana da tsada, ƙaramin ƙarfi ƙasa da 60W sananne ne, girman alamarsa ƙarami ne, yawanci 110*110mm -300*300mm, Injin alamar laser na CO2 shine 80w-150W, yi amfani da bututun gilashi kamar RECI. Ana iya amfani da shi don yin alamar girma kamar 300*300mm, 600*600mm-1200*1200mm (yi amfani da na'urar daukar hoto ta galvo mai ƙarfi ta 3D)

Buƙata

1. Menene babban buƙatar sarrafa kayanka? Yanke Laser ko sassaka Laser (alama)?
2. Abin da kayan da kuke buƙatar aiwatarwa ta Laser?
3. Menene girman da kauri na kayan?
4. Sunan kamfaninka, gidan yanar gizonka, Imel, Waya (WhatsApp…)? Shin kai mai siyarwa ne ko kuma kana buƙatar sa don kasuwancinka?
5. Ta yaya kake son aika shi, ta teku ko ta gaggawa, ko kana da naka mai aikawa?

Tuntube Mu